Customer Demand Trade Name Specification/mm postscript 3% Yb:YAG 4.4*4.4*17.4mm 4.4*4.4 surface detection and polishing Processing Index Dimensional tolerance: +0.1mm Concentration tolerance: ±0.03% Crystal direction: 17.4 direction is (100) direction, side direction is (010) Polishing: 4.4*4.4 surface inspection polishing Chamfer: <0.1 and even chamfer Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing V:YAG Crystal 3*3*0.43mm Coated sheet Process indicators T0=90% a=2467@1340nm AR/AR@1340 Picture of Shipment
Customer Demand Trade Name Specification/mm Concentration 0.2% Ti: Sapphire Φ4*15mm 0.2% Process indicators Concentration: 0.2% Size: Φ4*15mm Cut: cloth cut 60.4° Polishing: double-sided fine polishing Coating: AR/AR@(670-800)nm, R<0.5%@(670-800)nm Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing V: YAG crystal 3*3*0.43mm T0=90%, α=2.467@1340nm S1/S2:AR/AR@1340nm(R<0.5%） Double toss Process indicators Polishing index: 40/20 Direction tolerance: generally no direction requirement Thickness/diameter tolerance: ± 0.10mm Parallelism: 1ˊ Vertical: 30ˊ Aperture: >90% Reverse side: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing Ti:Sapphire 6.6*11.2*18.5mm Double toss Processing Index End Face: Brewster Cut @808nm FOM: >200 Surface finish: 20/10 Parallelism: <10″ Verticality: <15′ Face type: 1/6-1/8 λ Wavefront: <1/4λ Clear aperture: >90% Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing Yb:YAG 3*1.5*1mm Two 3*1mm surfaces are polished and coated, and the remaining surfaces are finely ground Processing Index Doping: 7%; Surface Quality: 10/5; The S1 and S2 faces are at a wedge angle of 30 minutes (two 3*1 faces) Coating: S1: HR>99.8%@1030, AR<2%@940; S2: AR<0.2%@1030 Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing V:YAG Crystal Double throw Uncoated 5*5 mm, T0=85% @1319nm Double toss 5*5 mm, T0=90%@1319nm Double toss Processing Index Polishing Index: 40/20 Orientation tolerance: generally no orientation requirements Thickness/diameter tolerance: ±0.10 mm Parallelism: 1ˊ Verticality: 30ˊ Clear aperture: >90% Chamfer: <0.2×45° Picture of Shipment
Customer Demand Trade Name Specification/mm Remark Co:Spinel 2*2*2.401mm T0=90% Processing Index Orientation tolerance: generally no orientation requirements Thickness/diameter tolerance: ±0.10 mm Surface Finish: ’40/20 Parallelism: 1ˊ Verticality: 30ˊ Clear aperture:>90% Chamfer:<0.2×45° The damage threshold is as high as possible,>=1.5GW/cm2 Picture of Shipment
Customer Demand Trade Name Specification/mm Concentration Er:YAG φ3*35mm 50at% Processing Index Concentration: 50at% Size：φ3*35mm Flat/Flat S1 side, HR@2940nm, R>99.8%, S2 side, PR@2940nm, T=8-9% Verticality: less than 3 points, Flatness: less than 1/10 wavelength Finish: 60/40 Picture of Shipment
Customer Demand Trade Name Specification/mm Polishing KTP Crystal 9X9x20 mm Double Toss Processing Index Angle: theta=75.6° phi= 0.0° Double-sided Polishing（9X9 mm） Coating: AR/AR@1165nm & 979nm & 532nm Damage Threshold: 750MW/cm2, at 1064nm,10ns,10H Picture of Shipment
